Professional IC Distribution & Technical Solutions

The TDA8562Q is a car radio power amplifier manufactured by PHILIPS (now NXP Semiconductors). Below are its specifications, descriptions, and features based on factual information from the Manufactor Datasheet:

Specifications:

• Type: 4 × 40 W Bridge-Tied Load (BTL) car radio power amplifier
• Supply Voltage Range: 6 V to 18 V (operational), max 28 V (transient)
• Output Power:
• 4 × 40 W (max) at 4 Ω, 14.4 V, 1 kHz, 10% THD
• 4 × 22 W (typical) at 4 Ω, 14.4 V, 1 kHz, 1% THD
• Gain: 26 dB (fixed)
• THD (Total Harmonic Distortion): Typically 0.1% at 4 W, 4 Ω, 1 kHz
• Standby Current: < 100 µA
• Operating Temperature Range: -40°C to +105°C
• Package: 17-pin SIL (Single In-Line) plastic power package (HSOP17)

Descriptions:

• The TDA8562Q is a quad BTL amplifier designed for car radio applications.
• It features built-in diagnostics for short-circuit, overvoltage, and thermal protection.
• The device includes a mute/standby function for power management.
• It has a high output power capability with low distortion.

Features:

• High Output Power: Capable of delivering up to 4 × 40 W in BTL configuration.
• Low Standby Current: < 100 µA for energy efficiency.
• Protection Circuits: Includes short-circuit, overvoltage, and thermal protection.
• Mute/Standby Function: Allows for power-saving modes.
• Fixed Gain: 26 dB simplifies system design.
• Wide Supply Voltage Range: Supports 6 V to 18 V operation (transient up to 28 V).
• Robust Thermal Performance: Operates in a wide temperature range (-40°C to +105°C).

This information is based on the official datasheet and technical documentation from PHILIPS/NXP.